Models:306S-S

Basis Configuration:

Mechanical clutch, TY395 diesel engine, 130mm pitch, 260mm-wide steel caterpillar, 4-in-1 hydraulic valve, 6-way blade(1.6m), Ordinary adjustable seat, improved handle brake.

Optional: (plus addition cost)
1.Engine: .TY3100 EPA certified engine 
                   4Y22AT EPAIV engine 35HP
                   4Y22BT non-EPA engine 35HP
2.Rear protection mesh

OVERALL DIMENSION mm
:Overall length (with/without blade) 2200/2960mm
Overall width (with/without blade) 1430/1640mm
Overall height to top of ROPS 2160mm(can be adjusted to 2260mm)
PERFORMANCES
Operating weight: 2790kg
Max. drawout pull: 23.5Kn

Engine: TY395IT
Bore x stroke: 95 x105mm
Cylinders: 3
Max. power: 22.1kw/2000rpm
Output volume: 2.23L
Fuel: diesel
Optimum fuel consumption:≤243g / kWh
Optimum engine oil consumption:≤1.63g / kWh
Lubrication: Full pressure by rotary pump

DESIGN SPEED: Km/h at maximum power output
Forward - Low 1 0.86km/h
Forward - Low 2 1.09km/h
Forward - Low 3 1.77km/h
Forward - Low 4 2.81km/h
Forward - High 1 3.38km/h
Forward - High 2 4.27km/h
Forward - High 3 6.95km/h
Forward - High 4 11.02km/h
Reverse - Low 0.81km/h
Reverse - High 3.16km/h

TRANSMISSION
Clutch Single dry disk, diaphragm-spring clutch, 10", pedal control
Gearbox 2-shaft, 8 forward + 2 reverse, sliding gear shift
Main drive Spiral bevel gear
Final drive Externally meshed spur gear

BLADE:
Height of blade 675mm
width of blade 1640mm
Blade lift height 500mm
Digging depth 150mm
Cutting angle 52.5°
UNDERCARRIAGE-ROLLERS
Ground clearance :240mm
Track frame :Semi-rigid
Steel Track rollers (each side): 5 + 1
Track recoil system: Helical spring, screw adjusted
Number of Shoes (each side) 40 (pitch = 109mm)
Steel Track
Track width 290mm Track guage 1150mm

BRAKES & STEERING
Steering Clutches: Multiple dry cerametallic disk clutches, pedal control
Brakes: Band brakes, pedal control

HYDRAULIC SYSTEM
Pump / model Gear type / CBN-E314L
Relief valve pressure 16MPa (2230psi)
Control valve 4-spool
Blade Control 6 in 1 joystick control
Control - Lift Raise - hold - lower - float
Control - Tilt Right - hold - left
Blade cyclinders Double acting
Blade - Lift 50mm x 255mm(Qty 2)
Blade angle: 63mm x 280mm(Qty 2)
Blade - Tilt :63mm x 50mm(Qty 1)
Hitch control (single lever) :Raise - hold - lower(float)
Elevating ram :Single-acting
Bore & stroke 80mm x 100mm
Lifting capacity @ hitch point 7350 N (750 kg or 1650 lbs)
Hitch linkage Rear 3-point hitch, Category 1
3 point hitch upper pinhole φ19x44
3 point hitch lower pinholes φ22x35

ELECTRICAL SYSTEM
System voltage 12V
Self-rectifying alternator 200W
Starter 3kW
Battery 105Ah (maintenance free type)
Front head lamp 55W (Qty 2)
Rear lamp 55W (Qty 1)

POWER TAKE-OFF
Type: Mechanical dependant
Engagement - 540rpm 1812 Engine rpm
Engagement - 1000rpm 1772 Engine rpm
Shaft diameter 35mm (1 3/8"), 6 splines
Direction clockwise

REFILL CAPACITIES
Fuel 45 Ltr (11.7gal)
Engine oil sump 6 Ltr (1.6gal)
Gearbox 11 Ltr (2.9gal)
Hydraulic system 30 Ltr (7.8gal)
Coolant 9 Ltr (2.3gal)
Final drives (each) 2 Ltr (0.5gal)